30°/45°Angular Head Characteristics:

  1. Could change machine to make 30°/45° angular milling.
  2. Fit a spiral bevel gear, the machine more precise and wear resistant.
  3. To install a Graduated Ring which can be regulated 360° to choose the direction of the milling cutter.
  4. Suitable to inner boring and milling of slots, end face repair, and beveled chamfering, etc.
  5. Gear and spindle are made of chromium molybdic acid alloy steel, through quenching and precise grinding.
  6. Bearing is ball bearing, suitable for high-speed and light cutting.
  7. Cutter shank can use NT or BT (pull stud must be removed). Particular suitable cutter shank draw bar can be attached which should be required when ordering.
TYPE Max Tool Dia. Reduction Ratio Max Torque Max Horsepower Max Use Speed Spindle Steering Accessory
N30 ψ150 1:1 38KW 1000N.m 2000rpm #50/Forward M16×P2.0×67L-4Pieces
N45 ψ150 1:1 38KW 1000N.m 2000rpm #50/Forward M16×P2.0×67L-4Pieces