Features
Characteristics:
- Could change machine to make vertical milling.
- Fit a spiral bevel gear, the machine will be more precise and wear resistant.
- To install a Graduated Ring which can be regulated 360° to choose the direction of the milling cutter.
- There is graduated ring so we can choose the directions and adjust very easily.
- Gear and spindle are made of chromium molybdic acid alloy steel, through quenching and precise grinding.
- The bearing is spindle bearing, suitable for the light cut of high-speed.
- Cutter shank can use NT or BT (pull stud must be removed). Particular suitable cutter shank draw bar, can be attached, should be required when ordering.
specifications
| TYPE | Max Tool Dia. | Reduction Ratio | Max Torque | Max Horsepower | Max Use Speed | Spindle Steering | Accessory |
|---|---|---|---|---|---|---|---|
| N76GR | ψ200 | 1:1 | 55KW | 2000N.m | 1000rpm | #50/Forward | M20×P2.5×130L-6Pieces |
Download
