1. Could change machine to make vertical milling and cross milling.
  2. Volume is small, convenient operation, suitable to make complex of machine tools.
  3. Spindle are made of chromium molybdic acid alloy steel, through quenching and precise grinding.
  4. Bearing are use tapered roller bearing, suitable for low-speed cutting.
  5. Cutter shank can use NT or BT (pull stud must be removed). Particular suitable cutter shank draw bar can be attached which should be required when ordering.
  6. LENGTH:E73-300L,E75-500L .
TYPE Max Tool Dia. Reduction Ratio Max Torque Max Horsepower Max Use Speed Spindle Steering Accessory
K73 ψ150 1:1 63KW 1200N.m 2000rpm #50/Forward M18×P2.5×87L-6Pieces
K75 ψ150 1:1 63KW 1200N.m 2000rpm #50/Forward M18×P2.5×87L-6Pieces