1. Could change machine to make vertical milling.
  2. Fit a spiral bevel gear, the machine will be more precise and wear resistant.
  3. To install a Graduated Ring which can be regulated 360° to choose the direction of the milling cutter.
  4. There is graduated ring so we can choose the directions and adjust very easily.
  5. Gear and spindle are made of chromium molybdic acid alloy steel, through quenching and precise grinding.
  6. The bearing is spindle bearing, suitable for the light cut of high-speed.
  7. Cutter shank can use NT or BT (pull stud must be removed). Particular suitable cutter shank draw bar, can be attached, should be required when ordering.
TYPE Max Tool Dia. Reduction Ratio Max Torque Max Horsepower Max Use Speed Spindle Steering Accessory
N76GR ψ200 1:1 55KW 2000N.m 1000rpm #50/Forward M20×P2.5×130L-6Pieces